|
Post by bruce on Oct 19, 2014 11:42:00 GMT -5
I wanted to make a fleshing beam that I could use for hides from bear all the way down to muskrat, here is what I came up with; This is a 12" pvc drainage pipe Under that I have 4" then 3" then 2" all stacked onto each other like this; here are the bits and pieces. I have it bolted to the floor with 3/8" drop in anchors, when don I'll just unbolt and re-install the bolts into the anchors to keep the threads clear. The inner most conduit is 1,1/2" Rigid pipe drilled and tapped to the unistrut brackets. I think it should work well, thanks for looking.
|
|
|
Post by kirkwooder on Oct 19, 2014 12:56:00 GMT -5
Cool. Looks interesting, let us know how it works.
|
|
|
Post by realcountryboy on Oct 20, 2014 4:39:59 GMT -5
Looks like it would do the trick. Keep us updated on how well.
|
|
|
Post by bigredtrapper on Jan 7, 2017 16:32:22 GMT -5
hey Bruce how is your fleshing beam set up working out? I was thinking of making one like that!
|
|