|
Post by ambowpk on Mar 22, 2012 20:40:16 GMT -5
Tonight my father-in-law and I welded the split washer rings onto the JT Connor shock springs. When attaching MB Crunch swivels, do most weld the J hook shut or do you just leave it. Thank you for any insight for this rookie.
|
|
traps82
#3 Newhouse
Hope is always alive
Posts: 3,208
|
Post by traps82 on Mar 22, 2012 20:54:39 GMT -5
Some do and some dont.. I have done both and dont bother anymore.. But a few hundred J hooks.. Compared to the trap price.. Cheap insurance. If in doubt, swap it out..
|
|
|
Post by nightstalker1 on Mar 22, 2012 20:57:42 GMT -5
I weld most all "J" hooks closed EXCEPT the ones on MB Crunchproof and Jawbreakers
They are plenty strong just closed shut in my opinion
|
|
traps82
#3 Newhouse
Hope is always alive
Posts: 3,208
|
Post by traps82 on Mar 22, 2012 21:04:40 GMT -5
I weld most all "J" hooks closed EXCEPT the ones on MB Crunchproof and Jawbreakers They are plenty strong just closed shut in my opinion Tom has probably seen about 100 billion J hooks by now... ;D ;D
|
|