|
Post by whistlerwhittler on Nov 10, 2015 23:28:17 GMT -5
Beaver have placed dams inside the middle of these twin corrugated metal pipes. The culverts are good sized, about 36" to 48" in diameter and they're about 2/3 full of water. Assuming that the dams are 15 feet down inside the pipes. Would it be worth it to place a 330 inside the inlet end of each of these pipes? I'm thinking of setting them on the bottom of the pipe using a KB stabilizer and a dive stick floated across the mouth of the pipes. Or is this too big of an area to cover with a 330?
|
|
|
Post by mole on Nov 11, 2015 4:46:36 GMT -5
Try and see. beaver have a tendency to run center bottom. Good luck
|
|
|
Post by whistlerwhittler on Nov 11, 2015 6:33:07 GMT -5
Thank you Mole. I'll check it out.
|
|