|
Post by mole on Mar 23, 2013 8:05:09 GMT -5
Hello, I just ran a 30 - 06 case, a 270 case, a 280 case and a 25 06 case through a 25 06 sizeing die. They look real close to the exact same size. Would they be the same? 25 06.. Thank You Ed
|
|
oldeman
Fulton Montgomery Fur Harvesters Ass.
Posts: 581
|
Post by oldeman on Mar 23, 2013 8:30:52 GMT -5
This can be done as they are all based on the 06 case but you will have variations in neck thickness which will affect accuracy if you mix them.
|
|
|
Post by mole on Mar 23, 2013 15:02:08 GMT -5
Thank you.
|
|
|
Post by milkie62 on Mar 23, 2013 22:51:32 GMT -5
When I do my 308's I keep winchester and remington cases seperate.That way I know which bullet I have by looking at the case bottom.
|
|
|
Post by superduty on Mar 24, 2013 11:55:21 GMT -5
Before you use them they will need to be trimmed to correct length. Also as stated above the neck thickness will have to be addreseted. Case life might be short (split necks) if you do not annneal the necks.
|
|
|
Post by sweetalker on Mar 24, 2013 20:42:40 GMT -5
as superduty says up there, you must gage the case length and trim accordinly.
|
|