Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 10, 2013 17:21:17 GMT -5
Hi guys, I was hoping someone could point me in the right direction for 4 coiling my sleepy creek number 3s......like where and what to buy and any instruction? Thanks for any help with this!
Dale
|
|
|
Post by nightstalker1 on Jan 10, 2013 17:31:59 GMT -5
Post some pics of the trap.....set and closed
That way we can see if your spring pins are long enough for four coil springs
If too short, you will need a four coil kit....that will include a new spring pin
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 10, 2013 17:34:46 GMT -5
Post some pics of the trap.....set and closed That way we can see if your spring pins are long enough for four coil springs If too short, you will need a four coil kit....that will include a new spring pin I should be able to get that up tomorrow....I really appreciate the help Dale
|
|
|
Post by nightstalker1 on Jan 10, 2013 17:56:03 GMT -5
These photos show a spring pin that is long enough for the 4-coil springs to be mounted on it The extra rod is just a spring pin support that has been added to the trap
|
|
|
Post by jimd on Jan 10, 2013 18:10:07 GMT -5
I can get you 4 coil kits for the SC #3s. Let me know how many traps you want to do and Ill get you a price
|
|
|
Post by whartonrattrapper on Jan 11, 2013 9:40:54 GMT -5
nice setup nightstalker! there's a lot to be said for a mig welder and some steel. gives you something to do in the off season. suprised you didn't tach weld the J-hooks on the swivel while you were at it..
|
|
|
Post by nightstalker1 on Jan 11, 2013 9:57:06 GMT -5
No need to weld MB crunchproofs or Jawbreakers...they hold up fine
Some guys want even the above welded shut...customer preference
I just do what they want
|
|