|
Post by bridger175 on Jul 18, 2013 16:49:24 GMT -5
ok i am new to this forum my question is i bought a couple dozen wolf fang anchor ends and heavy duty s hooks and #2 chain and was going to make chain stakes like on FNT post but when i went to put the s hook through the stake end it would not fit not even my smallest s hook will fit through them but the heavy duty s hooks i bought are the same as fnt has on there wolf fangs i don't want to really put cable on them because i bought all the chain and s hooks. Any help or advise on what to do would be appreciated.
|
|
|
Post by STANLEY on Jul 18, 2013 18:04:19 GMT -5
Go to this site, londonlureco.proboards.com/Contact ,"OHIO" he is a moderator and sells the Wolf Fang. He's a good guy and should be able to answer your questions correctly. STANLEY
|
|
|
Post by bridger175 on Jul 18, 2013 18:20:30 GMT -5
Go to this site, londonlureco.proboards.com/Contact ,"OHIO" he is a moderator and sells the Wolf Fang. He's a good guy and should be able to answer your questions correctly. STANLEY
|
|
|
Post by bridger175 on Jul 18, 2013 18:21:21 GMT -5
Thanks STANLEY will do.
|
|
|
Post by bridger175 on Jul 19, 2013 19:55:08 GMT -5
ok question solved they make a new wolf fang with a bigger loop.
|
|